Routing and Switching MCQs with Answers

Chapter: 26

Q281:

Fill in the blank: Multicast transmission helps ________.

A. conserve bandwidth by targeting specific groups

B. increase traffic for all hosts

C. reduce network security

D. increase network latency

Correct Answer: A

Chapter: 26

Q282:

What type of address is used to send data to all hosts in a network?

A. Broadcast address

B. Multicast address

C. Unicast address

D. Anycast address

Correct Answer: A

Chapter: 26

Q283:

Fill in the blank: Unicast addresses in IPv4 are in the range ________.

A. 0.0.0.0 to 223.255.255.255

B. 224.0.0.0 to 239.255.255.255

C. 192.168.0.0 to 192.168.255.255

D. 10.0.0.0 to 10.255.255.255

Correct Answer: A

Chapter: 26

Q284:

What is the purpose of a multicast address?

A. To send data to a selected group of hosts

B. To send data to all hosts in the network

C. To send data to one specific host

D. To send data to a broadcast address

Correct Answer: A

Chapter: 26

Q285:

Fill in the blank: The directed broadcast address for the 172.16.4.0/24 network is ________.

A. 172.16.4.255

B. 255.255.255.255

C. 172.16.0.255

D. 172.16.4.0

Correct Answer: A

Chapter: 26

Q286:

What is a multicast client?

A. A host that subscribes to a multicast group

B. A host that sends data to all hosts

C. A host that communicates with one specific host

D. A host that forwards broadcast packets

Correct Answer: A

Chapter: 26

Q287:

Fill in the blank: The IPv4 broadcast address always uses ________.

A. 255.255.255.255

B. 224.0.0.0

C. 239.255.255.255

D. 192.168.0.0

Correct Answer: A

Chapter: 26

Q288:

What address is used for multicast transmission?

A. The range from 224.0.0.0 to 239.255.255.255

B. The range from 0.0.0.0 to 223.255.255.255

C. The range from 192.168.0.0 to 192.168.255.255

D. The range from 10.0.0.0 to 10.255.255.255

Correct Answer: A

Chapter: 26

Q289:

Fill in the blank: A limited broadcast address is used for ________.

A. communication limited to the local network

B. communication to all hosts in different networks

C. communication to specific multicast groups

D. communication to a single host

Correct Answer: A

Chapter: 27

Q290:

What type of traffic is most common in a network?

A. Unicast

B. Broadcast

C. Multicast

D. All of the above

Correct Answer: A

Chapter: 27

Q291:

When a PC sends an ICMP echo request, what is the destination address in the IP packet header?

A. The IP address of the sending PC

B. The IP address of the remote router

C. The broadcast address

D. The multicast address

Correct Answer: B

Chapter: 27

Q292:

Fill in the blank: To view broadcast traffic in Packet Tracer, you can use the ________ command or feature.

A. ping

B. Add Complex PDU

C. Traceroute

D. Netstat

Correct Answer: B

Chapter: 27

Q293:

What does the Add Complex PDU feature of Packet Tracer allow you to do?

A. Directly ping broadcast addresses

B. View unicast traffic

C. Monitor multicast traffic

D. Analyze packet headers

Correct Answer: A

Chapter: 27

Q294:

Fill in the blank: In a unicast packet, the source address in the IP packet header is the ________.

A. IP address of the remote router

B. IP address of the sending PC

C. Broadcast address

D. Multicast address

Correct Answer: B

Chapter: 27

Q295:

What type of packet is used to directly send to a specific destination without affecting others?

A. Unicast

B. Broadcast

C. Multicast

D. Anycast

Correct Answer: A

Chapter: 27

Q296:

Fill in the blank: When using the ping command in Packet Tracer, the packet is sent to ________.

A. all hosts on the network

B. the intended destination

C. host that is multicast

D. a broadcast address

Correct Answer: B

Chapter: 27

Q297:

What type of traffic involves sending data to all hosts in the network?

A. Broadcast

B. Unicast

C. Multicast

D. Anycast

Correct Answer: A

Chapter: 27

Q298:

Fill in the blank: ICMP echo requests are typically used to test ________.

A. network connectivity

B. host availability

C. packet integrity

D. routing paths

Correct Answer: A

Chapter: 28

Q299:

What is the address range for private addresses in the 10.0.0.0/8 block?

A. 10.0.0.0 to 10.255.255.255

B. 172.16.0.0 to 172.31.255.255

C. 192.168.0.0 to 192.168.255.255

D. 224.0.0.0 to 239.255.255.255

Correct Answer: A

Chapter: 28

Q300:

Which address block is designated for link-local addresses?

A. 192.0.2.0 to 192.0.2.255

B. 169.254.0.0 to 169.254.255.255

C. 240.0.0.0 to 255.255.255.254

D. 127.0.0.0 to 127.255.255.255

Correct Answer: B

Routing and Switching MCQs with Answers

Fill in the blank: Multicast transmission helps ________.

What type of address is used to send data to all hosts in a network?

Fill in the blank: Unicast addresses in IPv4 are in the range ________.

What is the purpose of a multicast address?

Fill in the blank: The directed broadcast address for the 172.16.4.0/24 network is ________.

What is a multicast client?

Fill in the blank: The IPv4 broadcast address always uses ________.

What address is used for multicast transmission?

Fill in the blank: A limited broadcast address is used for ________.

What type of traffic is most common in a network?

When a PC sends an ICMP echo request, what is the destination address in the IP packet header?

Fill in the blank: To view broadcast traffic in Packet Tracer, you can use the ________ command or feature.

What does the Add Complex PDU feature of Packet Tracer allow you to do?

Fill in the blank: In a unicast packet, the source address in the IP packet header is the ________.

What type of packet is used to directly send to a specific destination without affecting others?

Fill in the blank: When using the ping command in Packet Tracer, the packet is sent to ________.

What type of traffic involves sending data to all hosts in the network?

Fill in the blank: ICMP echo requests are typically used to test ________.

What is the address range for private addresses in the 10.0.0.0/8 block?

Which address block is designated for link-local addresses?

Test Your Knowledge